rcn-ee.com

Lucid xfce4 Demo Image

Rob — Fri, 21 May 2010 03:32:24 +0000

I’ve uploaded a new Ubuntu Lucid (10.04) Xfce4 based Demo Image for the BeagleBoard. This is the xfce4 gui variant I’ve been promising. This image requires at least a 2GB SD card, USB keyboard/mouse and HDMI/DVI Monitor. Ubuntu’s RootStock utility is still affected by lp Bug 532733, so this was accomplished by running RootStock native on a beagle. (just a temporary solution as it’s not 100%.) RootStock on ARM

http://elinux.org/BeagleBoardUbuntu#Demo_Image

Highlights:

2.6.33.4-l3 from 2.6-stable
Zippy1 and Zippy2 Expansion Support
rootfs setup script (./setup_sdcard.sh –mmc /dev/sdX)
u-boot-2010.03
x-load-1.4.4ss

Known Bug & Notes:

oem-config needs swap, “–swap_file 100″
gdm theme doesn’t scale correctly to login: select “auto login” during user configuration
Network Manger loads in background but a doesn’t seem to load a xfce4 gui: “sudo nm-applet”

Updated Karmic and Lucid beta demo images

Rob — Thu, 15 Apr 2010 13:29:52 +0000

I uploaded a new Karmic and Lucid Beta2 demo images last night.

If you test out the lucid image, post any remanding bugs or weird issues here: http://elinux.org/BeagleBoardUbuntuLucid I’m still working on a oem-config based minimal image (no more default user name and password) and a xfce4 gui variant…

http://elinux.org/BeagleBoardUbuntu#Demo_Image

BeagleBoard Lucid Beta2 minimal Image

Rob — Fri, 09 Apr 2010 03:20:02 +0000

I just uploaded a new minimal image to rcn-ee.net based off Ubuntu’s Lucid Beta2 Release. I was hoping to upload a gui based user config and an xfce based image but ran into a couple last minute issues, so i’ll try again around release time.

http://elinux.org/BeagleBoardUbuntu#Demo_Image

Highlights:

2.6.32.11-l12 from 2.6-stable
rootfs setup script (??. setup_sdcard.sh –mmc /dev/sdX)
u-boot-2010.03-rc1+r44 from Angstrom
?x-load-1.44+r9 from Angstrom

FAQ: On First boot, hold down the ‘user’ button so X-load-1.44 loads, then flash it over the older 1.41 or 1.42 (http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot) x-load.bin.ift is already on the sd card.

ubuntu has a ti-omap kernel branch

Rob — Thu, 11 Mar 2010 13:41:19 +0000

Found this last night while git pull-ing:

http://kernel.ubuntu.com/git?p=ubuntu/ubuntu-lucid.git;a=shortlog;h=refs/heads/ti-omap

A 2.6.33 kernel for the beagleboard and other omap boards in ubuntu’s repo. (lucid is armv7-a)

rcn-ee.com no longer readonly!

Rob — Wed, 10 Mar 2010 15:49:40 +0000

Talk about a weird wordpress bug, for the longest time, I could not edit/create any posts with 2.8.x. With an upgrade of 2.9.2 this morning everything is working again…

Quick updates from the last year…

Server move: due to space/bandwidth issues on rcn-ee.com. rcn-ee.net is currently hosting all beagleboard kernels for ubuntu & debian.

What is the beagle based kernel farm currently doing? Well Nothing at the moment according to: http://rcn-ee.homeip.net:81/dl/farm/log/

The Farm currently consists of:
Beagle Bx (musb testing)
Beagle C2 (gcc/kernel builds)
Beagle C4 (ehci testing)
Sheevaplug (kernel builds)

Kernel source has since moved to launchpad: https://code.launchpad.net/~beagleboard-kernel
Personal Goal is to get Ubuntu to build these next to the freescale and marvel *.deb’s…

Finally 2.6.33 has entered my 2.6-dev tree, in some ways it seems better then the 2.6.32 in the 2.6-stable tree, but it’s hard-locking when running the gcc test suite… I’m also working on adding igepv2 support to my builds, as i find the 512Mb of ram very usefull.

Some users will find this interesting: http://global.phoronix-test-suite.com/?k=profile&u=robertcnelson-3173-25135-22766

Ubuntu Side: Alpha-3 was just recently released for lucid, I’ve posted an image here: http://elinux.org/BeagleBoardUbuntu#Lucid_10.04_.28alpha-3.29

Note, to run lucid on any beagle based device, your defconfig MUST have these enabled:

CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_THUMBEE=y

and this non jaunty/karmic & lenny/squeeze compatible change:
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y

Heading off to San Jose

Rob — Tue, 15 Sep 2009 14:10:16 +0000

Well, I’m off for San Jose again, this time, some fun, sun, and good wine… So i’ll be away from irc, and email.

Sunny (hopefully) San Jose

Rob — Sun, 07 Jun 2009 18:30:17 +0000

Flying again! Heading to San Jose for a week of cortex training and a tan. So I won’t be as active on the boards or irc. Hopefully they took my advice, but I won’t know till i see the new demo boards. Wish i had more time to see the sites, but I’m pretty booked as is. Sorry Cousin, I didn’t know LA was 5-6 hours away… BTW, the free wifi at GFK is nice, probably won’t check my email/messages in MSP due to the wifi prices.

Debian Testing (aka Squeeze) Added to Builder

Rob — Mon, 16 Feb 2009 00:55:57 +0000

With the release of Debian 5.0 (Lenny) I’ve added an additional chroot on the beagle builder; Squeeze, which will begin building shortly. To help new beagleboard users, here is the list of all currently supported kernel *.deb’s and their location.

Debian Lenny: http://www.rcn-ee.net/deb/kernel/beagle/lenny/
Debian Squeeze: http://www.rcn-ee.net/deb/kernel/beagle/squeeze/
Debian Sid: http://www.rcn-ee.net/deb/kernel/beagle/sid/

Ubuntu 9.04: http://www.rcn-ee.net/deb/kernel/beagle/jaunty/

MojoHandhelds 8.04: http://www.rcn-ee.net/deb/kernel/beagle/hasty/
(armv5 & armv6)

As a reminder all changes are logged here:
http://www.rcn-ee.net/deb/kernel/changes.txt

and a straightforward install script:
http://www.rcn-ee.net/deb/kernel/update_kernel.sh

Weird: unable to login into Wordpress 2.7

Rob — Sun, 25 Jan 2009 15:33:05 +0000

So i finally figured out why i couldn’t login to my blog. I had enabled a new plugin about a month ago, well that forced the login screen to just reload. Renamed plugins to plugins.old and things are working again, now just to figure out why.

Ubuntu 9.04 for armel (Early Test)

Rob — Thu, 20 Nov 2008 01:53:25 +0000

So as everyone in the beagleboard world has probably seen, ARM & Canonical have gotten together to bring the full Ubuntu Desktop OS to the ARMv7. (Hopefully they recognize Mojo-Handhelds excellent work…) Today I happened to noticed an early post by ogra on installing Ubuntu on the Omap35x. He provides an early root file system and an upstream lo kernel uImage. Since it’s still very early, (just base level packages are built) I won’t provide complete instructions quite yet. (but for those that want to dig in and play, here’s a hint, SD-Card+deboostrap:repo:http://ports.ubuntu.com/jaunty/+QEMU )

As always kernel builds (along with a kernel deb for Jaunty in a few hours) based off of the Angstrom’s team excellent work are located here:
http://www.rcn-ee.com/deb/kernel/

and Changelog:
http://www.rcn-ee.com/deb/kernel/changes.txt
(edit: it’s probably useful for this to link to the valid file..)